Hanger Connection – When it is desired to maintain the continuity of the wall for structural, aesthetic, or construction reasons, a wall hanger can be used to suspend the roof or floor system.Care must be taken to insure that the use of a pocket does not interfere with the continuity of the vertical reinforcement in the wall. This detail is used when masonry continues above (either as part of the wall or as a parapet) the connection location and eccentricity is to be minimized. Pocket Connection – A pocket connection consists of framing the floor or roof system into a void in the masonry wall.This connection is used at the top of concrete masonry walls or when a change in wall thickness provides a ledge with sufficient bearing area as shown in Figure 1. Direct Bearing Connection – The direct bearing connection is often the simplest type of connection.The four primary types of connections, each having specific advantages, include: Additional requirements may be necessary in some locals, particularly where earthquake and high wind forces are to be resisted. The connections detailed herein address minimal requirements. Connections critical to the integrity of a structure. The transfer of loads between diaphragms and walls requires the proper design and detailing of the connection linking these elements.
